温县绿洋耐材磨料有限公司

金刚砂，SiC，学名碳化硅。碳化硅硬度仅次于金刚石、碳化硼和立方氮化硼，在无机材料中排行第四。目前已能通过热压烧结法制得高致密度的碳化硅。它具有很高的强度及良好的抗氧化性能，在高温下不变形，可作为高温燃气轮机上的涡轮叶片，也可作耐磨的密封材料，还可作火箭尾喷管的喷嘴及轻质的防弹用品等。晶胞为面心立方结构，每个晶胞含有4个C原子4个Si原子。与金刚石结构类似。纯的是无色晶体。密度3.06～3.20。硬度很大，大约是莫氏9度。一般的是无色粉状颗粒。磨碎以后，可以作研磨粉，可制擦光纸，又可制磨轮和砥石的摩擦表面。由砂和适量的碳放在电炉中加强热制得。

　　天然金刚砂又名石榴子石，系硅酸盐类矿物。经过水力分选，机械加工，筛选分级等方法制成的研磨材料。生产使用历史悠久，古代我国就有使用金刚砂研磨水晶玻璃，各种玉石的史例。十九世纪四十年代又远销东洋。分粗目，中目，细目三大类。其中粗目为黑红色，中目为淡红色，细目为红白色，各种目数粒度均匀，颗粒形状均一，成棱叫角晶体，有锋利的边缘，磨削力高。供石材类工业研磨大理石及其它软质材料。玻璃类工业研磨玻璃毛边，电视机显像管，光学器械，镜片，棱镜，钟表用玻璃等。金属类工业喷砂，除锈，研磨。印刷工业研磨胶版，以及轻工业加工塑样，皮革，砂纸等用途。

天然金刚砂的磨削力略低于电炉白刚玉，但其任性强，具有介壳状段口之特性，其优点是磨件的光洁度高，砂痕少而浅。磨面细而均匀，可提高产品质量，为本品的独特之处。天然金刚砂的研磨时间短，效益高，价格低廉，可弥补寿命短的不足

棕刚玉以优质铝矾土为原料，无烟煤，铁霄，通过采用在电弧冶炼。炉2200℃以上高温中提纯、除杂、结晶、分选、破碎、磁选、筛分等加工手段制成各种颗粒尺寸的产品。其质地致密、硬度高，粒形成球状，适用于制造陶 瓷、树脂高固结磨具以及研磨、抛光、喷砂、精密铸造等，还可用于制造高级耐火材料 。

　　棕刚玉具有纯度高，结晶好，流动性强，线膨胀系数低，耐腐蚀的特点。经数十家耐火生产企业实践验证，该产品在应用过程中具有不起爆、不粉化、不开裂的特点。

产品粒度按国际标准以及各国标准生产，可按用户要求粒度进行加工。通用粒度号为 F4~F320，其化学成份视粒度大小而不同。突出的特点是晶体尺寸小耐冲击，因用自磨机 加工破碎，颗粒多为球状颗粒，锐石牌棕刚玉具有纯度高，质地致密，堆积密度大，自锐性强，韧性好，磁性物含量特低的特点，用其制成的磨具磨削锋利，发热率低，磨削比高，且使用时沾附少；制成的烧结磨具具有烧成后颜色深蓝、不起网状裂纹、无锈斑的特点，适用于制造陶瓷、树脂高固结磨具以及研磨、抛光等。

F为固结磨具及喷砂用规格 P为涂附磨具用规格W为微粉，320#即W40

常用规格：磨料磨具F 1#-63# 4#—80# 90#—150# 180#—240#

段砂 0-1mm，1-3mm，3-5mm 5-8mm，8-12mm 25-0mm 10-0mm

50-0mm 30-0mm

细粉 180#-0， 200#-0 320#-0

物理性能：晶形三方晶系

化学性质 两性与酸反应 在王水中和氢氟酸中稍有腐蚀与碱反应 仅与强碱热溶液稍有反应 氧化还原效果 否

硬度 努谱硬度 2000 - 2200 Kg/mm2 莫氏硬度 9.0

颜色 深C

最高使用温度 1900 C

SiC, its scientific name is silicon carbide and the hardness is next to diamond, boron carbide and cubic boron nitride, ranked fourth in the inorganic materials. Currently, high density silicon carbide can through sintering process with hot pressing. It has high strength and good oxidation resistance, without deformation at high temperatures, can be used as turbine blades of high-temperature gas turbine, but also can be used for wear-resistant sealing material and makes the rocket nozzle and light bullet-proof appliances. Its structure cell has a face-centered cubic lattice structure; each cell contains four C atoms four Si atoms, similar with the diamond structure. Pure SiC is colorless crystals. Density: 3.06 ~ 3.20. It has a great hardness, about 9 Mohs degree. Generally, it is colorless powder particles. After grinding, it not only used for grinding flour, but also for polished paper and the friction surface of grinding wheel and whetstone.

Natural corundum, also known as garnet, belongs to the department of silicate minerals. It is good abrasive material made by hydraulic sorting, mechanical processing, and classification methods. It has a long usage history, in ancient China, people used corundum to grind crystal glasses and a variety of jade.

With bauxite, carbon material, iron filings as raw materials, Brown Fused Alumina is restored and obtained through the melting of the brown the brownartificial corundumin the furnace above 2200 ℃, and made of a variety of particle sizes products by purifying, crystallization, sorting, crushing, magnetic separation and screening methods. With its dense texture, high hardness and the formation of spherical particles, it is suitable for the manufacture of ceramics and resin, as well as the high-Bonded Abrasives grinding, polishing, sand blasting, precision casting and so on, also can be used to manufacture high-grade refractory material.

Brown Fused Alumina has high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion-resistant and other characteristics. Dozens of refractory manufacturers have proved in practice that the product has not detonate, non-powder, non-cracking characteristics in the application process.

Particle size is in accordance with international standards and can be processed as requirements. Universal size: No. F4 ~ F320, its chemical composition varies depending on grain size. Its prominent feature is the small crystal size, impact resistance and spherical particles. This product has high purity, dense texture, large bulk density, strong self-sharpening, good toughness, low level magnetic material content and other characteristics.

F for Bonded Abrasives and sandblasting specification; P for coated abrasives specifications; W for the powder, 320 # that is the W40

Common Specifications: Abrasives F 1 # -63 # 4 # -80 # 90 # -150 # 180 # -240 #

Sand 0-1mm ,1-3mm ,3-5mm 5-8mm ,8-12mm 25-0mm 10-0mm
50-0mm 30-0mm